What is the MOPS Program?
Our manufacured odorless
pump stations are not just another line of small, fiberglass basins for residential sewage. MOPS is a complete program that primarily benefits consulting and design engineers and owners with the following features:
MOPS provides a complete Engineering Report, suitable for submission to the Florida DEP for permitting. You simply provide us with the answers to a few simple questions most easily accessible via the form on our website, www.emops.com. Typically within a few days, we e-mail you a complete Engineering and Design Report and an AutoCAD drawing covering all design and calculation aspects of your pump station application.
MOPS are applicable for pumping sewage, effluent, stormwater pumping, and industrial wastewater pumping.
Atlantic Environmental Systems, Inc. is the originator, designer and holder of all copyrights and trademarks for the MOPS program. We are a licensed engineering company registered with the state of Florida, thus we can provide consulting engineers with signed and sealed drawings and design calculations for any MOPS pump station.
“MOPS services are normally provided at no cost to the consulting engineering firm.”
We frequently research lift station design details and provide this information to the consulting engineer. Such items include force main pressures, existing and new required flow rates, optimization of wet well diameter vs. depth, and difficult installation recommendations.
MOPS services are normally provided at no cost to the consulting engineering firm.
After we assist with the design aspects of the pump station we then provide competitive pricing to the project owner or to the site contractor of his choice.
MOPS pump stations are the highest quality on the market! They feature heavy-duty reinforced fiberglass wet wells or HDPE (High Density Polyethylene) wet wells, as preferred by some consulting engineers and/or local utilities having jurisdiction in the area.
MOPS pump stations include features required by the latest state of Florida standards as well as the “Ten State Standards”, such as odorless design features built in throughout the pump station, explosion-proof pump motors and intrinsically safe control panel design features, battery back-up design for all control panel alarms. A cellular phone RTU (Remote Telemetry Unit) for 24/7 notification of station problems is used for stations monitored by Atlantic Environmental Systems. (AES)
MOPS pump stations are available in the widest variety of sizes, from small simplex residential type (such as 2' or 3' diameter) and up to large duplex municipal types (in diameters from 4' up to 12' and depths from 5' up to 30' deep and more, as required). Available pumps range from grinder pumps (2 HP up to 16 HP) and non-clog pumps (4" to 8" discharge, 1 to 50 HP and larger).
Contact us at your convenience whenever you have a sewage, wastewater, effluent, or stormwater pump station application. We can be reached via phone (800-806-1563) or at the fax number or e-mail address listed on these pages.
The MOPS program is currently used by many national and local consulting firms.